考虑双向地震动作用的非对称结构多维Pushover分析

目前的Pushover分析多集中于平面单向分析,考虑到非对称结构反应的多维性,在单向地震动作用振型Pushover分析研究基础上,提出了考虑双向地震动作用的结构多维Pushover分析程序。采用弹性振型分解的思路,将非线性结构反应近似为结构多振型弹塑性反应的叠加,进而将结构按振型等效为多个等效方程,将每一等效方程转化为以双向实际地震记录的组合为地震输入的等效单自由度体系。在此基础上给出了考虑双向地震作用的非对称结构多维Pushover分析程序,并阐述了该方法与传统Pushover分析方法的区别,最后通过算例将该方法结果与非线性时程分析结果进行比较,证明了该方法具有一定的准确性。     

基于显示连通贝叶斯网络的机场塔台地震易损性分析

将基于性能的多维易损性分析方法,结合显示连通贝叶斯网络,应用于机场塔台的多维易损性分析。考虑地震激励的不确定性,通过非线性时程分析获得结构响应数据;将塔台结构分为三个层次,每个层次按包含的层数分为相应的子层次。根据功能特性确定子层次的评价指标和极限状态,建立服从多元对数正态分布的概率地震需求模型;考虑各种极限状态之间的相关性,建立极限状态方程,确定失效域,通过蒙特卡洛法求得构件的超越概率;建立塔台结构的显示连通贝叶斯网络模型,利用层次分析法获得中间节点的条件概率表,利用MATLAB进行贝叶斯网络的推理计算,实现从单一层次的易损性到整体易损性的推理。     

双原子分子激发态势能的自旋相关局域Hartree-Fock密度泛函理论方法

基于自旋相关局域Hartree-Fock (SLHF)势函数，本文提出了一种计算双原子分子激发态势能的密度泛函理论(DFT)方法，并将该方法应用于和的激发态势能曲线的计算。在只考虑交换能的情况下，本文的DFT计算结果与文献中精确方法和Hartree-Fock (HF)方法的结果符合的非常好，说明采用SLHF势函数作为交换势的DFT方法是一个很好的计算激发态势能的方法。本文还计算和探讨了电子的关联势函数和关联能，发现传统的近似方法在较大核间距的情况下大大低估了电子的关联能.     

自由基浓度测定方法的再验证及其在煤化学中应用

对前人建立的标准曲线法测煤中自由基浓度进行优化,以DPPH标准样品和基准样品的二次积分面积比值为新参数,结果显示新参数标准曲线法的实测值与理论值相对误差都在5%以内;重复性、复现性实验的相对标准偏差都小于3%。将新参数标准曲线法用于分析不同煤化程度煤和新疆黑山煤(HS)沥青质的自由基浓度,发现随着煤化程度增加,其煤中自由基浓度逐渐增大,从低阶褐煤的8.531×10~(17)/g上升到高阶无烟煤3.37899×10~(19)/g;而在HS煤液化过程中,随着加氢液化温度的升高,其沥青质自由基浓度逐渐下降,从290℃的1.5793×10~(18)/g降到450℃的7.410×10~(17)/g,沥青质自由基浓度变化趋势与其产率变化趋势相一致。     

测量圆盘转动惯量产生误差的曲线研究

结合三线摆实验的基本过程,进行实验数据的采集。利用投影法来测量圆盘的转角大小,借助于matlab的cftool工具箱,对数据进行曲线拟合,对测出来的二组数据拟合,得到转角与百分差曲线图。通过误差的大小比较,得出圆盘转动惯量测量值与理论值的百分差随转角变化最接近于三次曲线。     

Rational points and Galois points for a plane curve over a finite field

We study the relationship between rational points and Galois points for a plane curve over a finite field. It is known that the set of Galois points coincides with that of rational points of the projective plane if the curve is the Hermitian, Klein quartic or Ballico–Hefez curve. The author proposes a problem: Does the converse hold true? If the curve of genus zero or one has a rational point, we have an affirmative answer.     

A critique of the unsaturable trap model of radiation damage in metals

The unsaturable trap model, which attributes the increase of the electrical resistivity of fcc metals during electron irradiation in the temperature regime of Stage-II recovery to the trapping of Stage-I_E interstitials at impurity atoms, is shown to be in serious disagreement with the experiments, contrary to opposite statements in the literature. As shown recently, the predictions of the unsaturable trap model are independent of the dimensionality of the diffusion of the Stage-I_E interstitials. Previous attempts to rule out a one-dimensional migration of the Stage-I_E interstitials (and hence the two-interstitial model) on the basis of the alleged agreement of the unsaturable trap model with Stage-II damage curves are thus meaningless. On the contrary, it is demonstrated that the two-interstitial model accounts for minute details of the measured Stage-II damage curves in a natural way.     

Generalized nets in neurology: an example of mathematical modelling

The purpose of this paper is to explain the basic theory of generalized nets (GNs) and their applications in the context of the differential diagnosis of neurological diseases. We define formally the concepts of a GN and transitions of a GN and also outline some remarks on their theory. The work here constructs an example which aims to trace the process of diagnosing different signs and symptoms in neurology. This will enable the interested reader to see the scope of nets in general as tools for the modelling, simulation, optimization and control of real processes.     

A new method for the automated selection of the number of components for deconvolving overlapping chromatographic peaks

Mathematical deconvolution methods can separate co-eluting peaks in samples for which (chromatographic) separation fail. However, these methods often heavily rely on manual user-input and interpretation. This is not only time-consuming but also error-prone and automation is needed if such methods are to be applied in a routine manner.     

Influence of the surface morphology on the melting of polymer crystals. I. Loops of random length and adjacent reentry

A polymer crystal with a noncrystalline surface layer formed by chain loops of different lengths is considered. It is assumed that the length of each loop can be changed by longitudinal diffusion of the molecule through the crystal lattice. From the condition that the free energy of the system is minimum, the loop length distribution and the average loop length as function of temperature are calculated. In contrast to the results for loops of equal length, for the present model, a substantial thickness of the noncrystalline surface layer and a broad melting range is obtained also for the case of adjacent reentry. In order to get this result one has to take into account that even an “ideal fold” consists of at least four rigidly arranged CH2 groups in energetically unfavored conformation.